Section : devices development | “ABA-P-07” |
|
|
The analyzer is designed for analysis, accumulation, and processing of information from the scintillation detection unit, consisting of gamma-spectrometer, as well as transmitting of information processing results into the external devices.
|
The built-in analyzer’s software allows radionuclides identification and determination of their specific activity in the environmental samples: in soul, air, vegetation and so on.
The analyzer is designed for operation in field conditions, mobile and stationary laboratories. It can be used in emergency situations.
PERFORMANCE
Amplitude range of converted pulses, V
|
0,05÷10
|
Integral non-linearity, %
|
±1
|
Non-stability of calibration characteristic (for 8 h), not more than, % |
±1
|
Non-stability of counting characteristics (for 8 h), not more than, %
|
±5
|
Maximum input load, s-1
|
1•104
|
Power supply:
|
|
-using alternating current circuit
|
220 V, 50 Hz
|
-using built-in Storage battery, external source, V
|
10,5÷13,5
|
Operation time using built-in storage battery, not less than, hours
|
8
|
Mass with the storage battery, not more than, kg
|
8,0
|
FEATURES
- Available universal power unit ensures automatic recharging of the built-in accumulator.
- There is a possibility to measure in field conditions in completely automatic mode with data saving.
- There is a possibility to connect detectors with different volume and sensitivity.
- It operates reliable in hard radiation fields (10-80 mP/h).
- It has increased protection from dust and moisture.
- It is possible to operate in wide range of temperatures.
- There is an indicator of condition and hand control of supply unit condition.
- There are interfaces RS-232 and RS-485 available.
- Connection with PC through the standard port is possible.
|